Installer fitted incoming devices include:-

200A Lugs; 200A SPSN or TP Switch-Disconnectors; and any TP 'F' Frame MCCB up to 200A.

All standard 100A distribution board incomers can also be fitted.

Double pole distribution boards have a single pole and switched neutral incoming circuit. They allow for single pole and switched neutral MCBs to be fitted on all outgoing circuits which is necessary for the control of circuits situated in hazardous areas.

SPSN or DP MCBs and SPSN RCBOs can be fitted.

TPN type B distribution boards are also available fitted with TP FCS incomers. The FCS incomer uses Eaton MEM BS 88 fuses, which allow the unit to be fused from 2A - 125A. This is a benefit for applications where the load may increase in the future, as the FCS can be re-fused accordingly.

These distribution boards comply fully with BS 5486: Part 12 and BS EN 60439-3.

Modular Enclosures
Memshield 2 modular enclosures can be used to house Memshield 2 protective and command devices. Enclosures are available to house from 2 to 45 x 18mm modules in moulded or metal construction up to IP55.

Up to three Memshield type A pan assemblies can be fitted into an enclosure.

To select a suitable enclosure, select the devices required and calculate the amount of 18mm modules required, then select the enclosure that can accommodate at least that many 18mm modules.

BMX 15 module enclosures can be mounted onto AM13 or any Memshield 2 TPN distribution board. Distribution board accessories e.g. door lock kit are suitable for use with BMX type enclosures.

BMXDC enclosures are fitted with earth and neutral bars as standard. Additional earth and neutral bars for 30 and 45 way enclosures are available for specific applications.

Metal enclosures will accommodate all modular devices, i.e. MCBs, RCCBs, RCBOs, HRC fuse modules and command devices.

Moulded enclosures 4/6 QEL, 4EME and AM1SL will not accept RCBOs. 4EME will accept command devices and TPSN RCCBs only.

The MEMSHIELD 2 Surge Protective Device has been developed specifically for application with Memshield 2 'A' Type and 'B' Type single and three phase MCB distribution boards, ensuring outstanding product performance for all sensitive, mission critical and general purpose loads.

The UL1449 Second Edition and UL1283 listed devices provide high peak surge current ratings and exceptionally low real-world measured limiting (let-through) voltage values, together with outstanding durability, assuring the Memshield 2 range will provide a lifetime of effective, maintenance free protection for all electrical and electronic systems.

BM242 = 1091.5mm H x 400mm W x 131.5mm overall Depth.