The Exel IP local switch-disconnector heavy duty range complies with BS EN 60947 and is available in ratings from 20A to 1250A.

Units are available in IP55 or IP65 enclosures.

The IP55 range complies with BS EN 60947. It consists of switches mounted in sheet steel enclosures, rust protected and having a powder coat finish.

All enclosures have bolt-on removable front covers with gland plates top and bottom. Cable entries must br site drilled. Switches are base mounted on the enclosure back plate.

Each enclosure has ample wiring space making additional cable boxes unnecessary when using standard copper cable.

Two tone grey operating handles are suitable for padlocking.

The range of disconnectors may be installed indoors or outdoors under sheltered conditions. They are ideally suited to installations where vibration or mechanical shock conditions prevail.

A variety of contact configurations and additional features are available - contact factory for details.

The IP65 range complies with BS EN 60947. This range has been designed specifically for outside locations where extremely adverse conditions exist.

Each switch is mounted in a weatherproof enclosure with a sealed switch spindle and lid mounted handle providing interlocking facility allowing the lid to be removed only when the switch is in the 'OFF' position.

The enclosure is toughly constructed of sheet steel with durable, corrosion resistant coating of 70 microns (minimum) polyester powder coat providing a degree of protection of IP65.

Switches are supplied with - gland plates fitted to all units. Suitable weatherproof glands should be used during installation and cabling.

Operating handles have facility for padlocking in both 'ON' and 'OFF' positions.

The standard range is available in configurations of up to six main poles up to 160A and 3 or 4 pole for higher ratings.