Fused Combination Switches

Accessories

IP65 Handles
Alternative handles are available for standard and test switches. (Non defeatable for ON/OFF action, non interlocked in test position for ‘ON-OFF-TEST’ action). Details on request.

These handles require special IP65 shafts/adaptors.

Auxiliary Switches
List No. ASP contains 2 N/O contacts.
List No. 1ASP to 8ASP each contain two sets of changeover contacts. These moulded units have been designed to offer protection against accidental finger contact.

Auxiliary packs can be added to the drive shaft of any switch rating via the appropriate mounting pack adaptor.

Technical Data, Ith=10A:

Changeover Switches Auxiliaries
Three position (1-0-2) changeover switches are available in TP, TPSN and TPN versions.

Auxiliaries can be added to each operating position.

Please note that an auxiliary switch mounting pack is required for both sides on changeover and test position switches.

Locking Devices
Standard handles are capable of accepting three padlocks to lock the handle in the ‘OFF’ position.

Mechanism Padlocking Device
To lock switch in ‘OFF’ position when enclosure is ‘OPEN’.

Suitable padlock List No. PD4

Figure locking Device
To provide locking ‘ON’, ‘OFF’ and interlocking facility.

The device is a shaft mounting interlock cam attachment for adaptation to Castell or Fortress figure locks (not supplied).

Cable Terminal Shrouds
Packs of clear polycarbonate shrouds to protect cable terminations from unintentional contact (1 per pack).

A pack of eight push-in plugs List No. 1TS4 are available for frame size 1 and 1a which have finger protected main terminals.