Unitole MV systems are available in three versions, can be used for rated voltages from 3.6kV to 24kV.

Unitole UR systems are suitable for sub-distribution stations.

• Metal enclosed, air insulated switchgear with cassette vacuum circuit breakers
• IP4X ingress protection
• Short time current 25kA / 3 seconds
• Rated voltage IEC 12kV
• Conforms to IEC 60298 and IEC 529

Unitole MV systems are available in three versions, can be used for rated voltages from 3.6kV to 24kV.

Unitole UP systems are suitable for motor control centres in industrial networks and power plants.

• Metal enclosed, air insulated switchgear with draw-out vacuum circuit breakers, vacuum contactors and switches
• IP4X ingress protection
• Short time current 40kA / 3 seconds
• Rated voltage IEC 12kV
• Conforms to IEC 60298 and IEC 529

Unitole MV systems are available in three versions, can be used for rated voltages from 3.6kV to 24kV.

Unitole UT systems are suitable for main and sub-distribution stations.

• Metal enclosed, air insulated switchgear with draw-out vacuum circuit breakers, vacuum contactors and switches
• IP4X ingress protection
• Short time current 40kA / 3 seconds and 31.5kA / 3 seconds
• Rated voltage IEC 12kV and IEC 24kV
• Conforms to IEC 60298 and IEC 529

• Ideal use for voltages up to 24kV
• Fully metal enclosed EMC design means that there is a low risk of internal arcing
• Requires virtually no maintenance

• Developed for applications up to 24kV
• Panels are assembled from modular components including circuit breakers, load break switches, fuse holders, metering packs, busbar and cable terminals
• Innovac SVS/12, developed for use in large grid substations
• Offers extras to Innovac SVS including; 1250A main busbar system and a larger cable compartment

• Compact, robust and simple to operate
• Benefiting from modular design, numerous configurations are possible
• Tested and certified in accordance with International standards
• Application includes transformer stations and switching points in medium voltage distribution networks

• Standard range of cubicle sizes for front/rear connection, bottom or top entry of cables
• Corner cubicle for angular mounting; cubicle design with reduced height
• Up to 16 drawout units per cubicle; adaptor set for 32-drawer system available
• Wide range of options, such as soft starters, frequency converters, PLC controlled synchronisation and changeover equipment, units for power factor improvement, etc.
• Compartments for drawout units can be modified without process interruption
• Cable connection to drawout units can be accomplished under live conditions
• For assemblies with combined motor control and high current distribution functions, Capitole-40 MCCs can be coupled to Capitole-60 switchboards (up to 6300A)