• Comply with IEC 60439-2 and BS EN 60439-2 standards and suitable for use at 415V 3 phase 50Hz
• A choice of ingress protection IP41 or IP55
• Manufactured from extruded aluminium section and is available in 3 metre, 2 metre and 1 metre lengths with tapping outlets every 1 metre along its length
• Copper phase and neutral conductors (4 pole or 6 pole)
• Tap-off outlets have protective covers to prevent accidental contact with live conductors
• Tap-off units are plug-in type and provide protection during connection and disconnection. Supplied either pre-wired or with terminals for direct connection
  

• Complies fully with IEC 60439-2, BS EN 60439-2 & EN60439-2 standards and suitable for use in a 415V, 3 phase, 4 wire, 50Hz supply
• Enclosure manufactured from shaped extruded aluminium profile with interlocking covers manufactured from A.B.S. plastic, flammability grade UL94V-O
• A choice of ingress protection IP4X (IP54 on request)
• Available in 3m lengths (other lengths available on request) with tapping outlets every third of a metre along its length. Each length is complete with mechanical coupling and spring-loaded electrical contacts to provide a quality joint automatically
• Fire resisting barriers can be provided within the trunking where the enclosure passes through fire-rated floor or wall positions
• Power tap-off points are provided at 333mm intervals on one side of the trunking and are fully shrouded by automatic shutters ("finger safe") to prevent accidental contact with live parts
• ASTA Certified
  

• Compies fully with IEC 60439-2 and BS EN 60439-2 standards and is suitable for use in a 415V, 3 phase, 4 wire, 50Hz supply
• Manufactured from shaped extruded aluminium profile with interlocking flame retardant moulded covers
• Available in 3m or 2m lengths with tapping outlets every third of a metre along its length. Each length complete with mechanical coupling in order to provide a quality electro-mechanical joint
• Ingress protection of IP4X (IP54 on request)
• Fire resisting barriers can be provided within the trunking where the enclosure passes through fire-rated floor or wall positions
• Power tap-off points are provided at 333mm intervals on one side of the trunking and are fully shrouded by automatic shutters ("finger safe") to prevent accidental contact with live parts
• ASTA Certified

The XP range brings the design of low impedance, sandwich construction busbar trunking to a new superior level.

Available from 500A up to 6300A.

• Designed and manufactured in accordance with BS EN 60439-1,
  BS EN 60439-2, BS 7671 (IEE Wiring Regulations)
• Supplied as factory assembled units
• Tap-off outlets have integral shutters that will automatically open upon fitting of a tapping unit
• Tap-off outlets are located every 500mm and on both sides of the trunking
• A choice of ingress protection IP4X or IP54
• ASTA Certified