| Memshield 2 Miniature Circuit Breakers |
|
The Memshield
2 MCB is an all new high performance current limiting device
with the ability to disconnect short circuits of up to 15kA. The feature packed device is both British designed and manufactured, using the latest technology. |
|
Memshield 2 miniature circuit breakers are available in one of the widest ranges available in the world; over 600 different types are available. MCBs comply with Lloyds Register of Shipping. The MCBs are suitable for use with Memshield 2 distribution boards. In addition MCBs are suitable for a wide range of OEM applications. Current
ratings available :- 1, 2, 4, 6,
8, 10, 13, 16, 20, 25,
32, 40, 50 & 63A. On SPSN the switched neutral is unprotected, on DP and FP all poles are protected. SPSN are fitted with neutral contacts which make first and break last. Units
are also suitable for use on DC systems from 24V to 120V;
When fitted with an RCD Pod to form an RCBO, the combination is suitable for use with 240V AC systems; it is not suitable for DC or 110V AC systems. MCBs are calibrated to 40°C. 50°C can be supplied - add 'X' to end of list number. |
|
|
1). Any SP or SPSN
MCB can be factory or site fitted with an RCBO pod providing
hundreds of possible combinations. 2). Magnetic Type characterisics to BS EN 609898 B, C, D for a wide choice of applications. 3). Foolproof positive contact indication gives the assurance of isolation. 4). Breaking capacities of up to 10kA (BS EN 60898) and 15kA (BS EN 60947-2). 5). Five pole configurations and 14 current ratings for increased flexibility. 6). Quality trip free mechanism prevents MCBs from being held 'ON'. 7). Optional padlock dolly for positive locking 'ON' or 'OFF'. 8). High performance current limiting design for safer installations. 9). Optional screw and terminal shields for full shrouding of MCBs. 10). All new 'easy fit' British design. 11). Generous, wire-in, wire-out, box type terminals for cables up to 25mm², and fork type comb busbar facilities on line and load side for OEM installations. |
|
12). Terminal clamp
cable and fork type comb busbar simultaneously. 13). Mounting on standard 35mm DIN-rail to BS 5584 / EN 50 022 for individual and OEM installations. 14). Finger protected combination head screws to increase safety and allow easier installation. 15). Optional rear connectors to allow cables up to 50mm² to be terminated where space is limited. 16). Thermally calibrated to 40°C with 50°C option to cover a wider range of ambient temperatures. |
|
